www.tmatlantic.com
2
1. DESCRIPTION
Soldering & Desoldering Station is a high-performance and multi-function station. This tool is used in the fields of
electronic research, teaching and production, especially in the repairing and reworking on the electronic appliances
and communication equipments.
1.1 Control Unit
The soldering iron and the desoldering gun tool are controlled automatically by two micro-processors. The digital
control electronics and high-quality sensor and heat exchange system guarantee precise temperature control at the
soldering tip. The highest degree of temperature precision and optimal dynamic thermal behavior under load conditions
is obtained by the quick and accurate recording of the measured values in a closed control circuit, and this design is
especially for the lead-free production technics.
1.2 Soldering Iron
Soldering iron with a power of 48W (Heat up rating 130W) and a wide spectrum of soldering tips can be used
anywhere in the electronics field.
The high power and slim design makes this iron suitable for fine soldering work. The heating element is made of
PTC and the sensor on the soldering tip can control the soldering temperature quickly and accurately.
1.3 Desoldering gun
Desoldering iron gun with a power of 80W (Heat up rating 130W) and a wide spectrum of soldering tips can be used
anywhere in the electronics field.
The high power and gun type design makes this iron gun suitable for fine desoldering work. The heating element is
made of PTC and the sensor on the desoldering tip can control the desoldering temperature quickly and accurately.
2. TECHNICAL SPECIFICATION
Rated voltage range AC 100-240V; rated power input 140W; 50/60Hz.
3. OPERATING INSTRUCTION
3.1 Place the desoldering iron gun in the holder separately. Then connect the plug to the receptacle on the station
and turn clockwise to tighten the plug nut. Check that the power supply is corresponding to the specification on the
type plate and the power switch is on the “OFF” position. Connect the control unit to the power supply and switch on
the power. Then a self-test is carried out in which all display elements are switched on briefly. The electronic system
then switches on automatically to the set temperature and displays this value.
3.2 The display and temperature setting
The digital display:
1. shows the actual temperature of the desoldering tip .
2. shows the setting temperature. Pressing the “UP” or “DOWN” button can switch the digital display to the set point
display. The set-point can be changed for ±1
°
C by tapping the “UP” or “DOWN” button. Pressing the button will
change the set-point quickly. The digital display will return automatically to the actual value and the iron will reach
to the setting temperature quickly.
3.
°
C/
°
F display: Switching the temperature display from
°
C to
°
F by pressing the “
°
C/
°
F”button and then the
electronic system will display the actual temperature
1
and setting temperature
2
in
°
F, and vice versa.
4. When the actual temperature on the soldering tip is less than the set-point, “HEAT ON” will display and make the
desoldering tip heating up.
5. When the absolute offset is more than ±10 between the actual temperature and the set-point on the soldering tip
or the nozzle, “WAIT” will display. It means that the temperature electronic control system is not in the stable situation,
we should wait a moment to let the “WAIT” disappear.
6. When “ERROR” display, there may be a trouble on the system, or the soldering iron is not connected to the
control system correctly.
4. SAFETY INSTRUCTION
The manufacturer assumes no liability for uses other than those described in the operating instructions or for unau-
thorized alterations.
The operating instructions and cautions should be read carefully and kept in an easily visible location in the vicinity
of the control system. Non-observance of the cautions will result in accidents, injury or risks to health.
