3
7. LCD
This is a 3 3/4 digit Liquid Crystal Display with maximum indication of 3999.
Function symbols, units, bargraph, sign, decimal points, low battery symbols,
max/min symbols, and zero symbol are included.
8. Low Battery Symbol
When this symbol appears, it means the battery voltage drops below the minimum
required voltage. Refer to Section V for battery replacement.
9. Zero/Relative Symbol
When this symbol appears, it means a reference value has been subtracted from
the actual reading. The reading shown is a offseted value. Press and hold the
zero button for 2 seconds to disable this function.
10. Data Hold Symbol
Once the hold button is pressed, this symbol appears on LCD.
11. 40 segments Bargraph
Bargraph has forty segments. It displays segments proportional to the actual
reading. Each segment represent one hundred counts.
12. Max/Min Hold Symbol
Once the max/min button is pressed, either MAX or MIN shall be displayed on
LCD
13. Continuity Symbol
If ohm and continuity function is selected, this symbol shall appears on LCD.
14. Units Symbols
Once a function is selected, corresponding unit (V,
, A, or Hz) shall be displayed
on LCD.
15.Hand Strap
Put your hand through the hole of hand strap to avoid accidental drop of the clamp
meter.
www.tmatlantic.com
