Aksoz ALY05, Operating And Maintenance Manual

Page: 24 / 36

24
4- INSPECTIONS AND MAINTENANCE
4.1 STORAGE AND SERVICE LIFE
The safety gear should be stored in a cool, dry place. It should be
protected from excessive lighting. It should never be exposed to severe
weather conditions.
Storage temperature: 5 - 40
o
C Storage humidity: 15 - 85% without
condensation.
The safety gears’ packaging should be clean and dry, so that they can be
clearly identified.
It is not permitted to place constant or unbalanced loads on a package,
which may cause the package to be bent, or to allow products to be
stacked one on top of the other. When stacking products or packages, the
storage height should take into account their load and stability.
If the criteria established for proper maintenance are observed, the safety
gears may have the same service life as the rest of the installation’s fixed
elements provided that their proper functioning is ensured and con-
trolled. The element’s service life is not affected by grease, dust or dirt
due to the shaft’s condition or to environmental conditions differing from
those stated in this manual.