
21
• Bad connection towards oil pressure switch/coolant
temperature switch.
Note: Please, look the engine manual for maintenance.
11. STORAGE
11.1. Engine storage
1. If the engine is to be put out of service for a long
period of time, it is necessary to drain out lubricating
oil, cooling water and fuel when engine is still warm
after stopping the engine.
2. Remove sludge and dust from outer surface of the
engine. Smear anti-rust oil on to exposed machined
surface of parts of the engine. Rubber plastic compo-
nents are prohibited to be smeared with oil.
3. Block the intake and exhaust manifolds with wrap
up them properly with plastic cloth in order to prevent
any dust from getting in.
4. The engine so preserved should be stored in room
of good ventilation and low humidity but without any
dust It is strictly forbidden to store the engine wherev-
er there are chemicals, The preservation according to
the above procedure may be good for three months.
Over this period, repeat this procedure.
5. Put a warning tag on the engine which contains the
following information: Date the engine was prepared
for storage. Crankshaft must not be rotated. Coolant
has been drained. Engine must not be operated.
11.2. Alternator Storage
When an alternator is in storage, moisture tends to
condense in the windings. To minimize condensation,
store the generating set in a dry storage area. If pos-
sible use space heaters to keep the windings dry. After
removing the generating set from storage, perform an
insulation check
11.3. Battery Storage
While the battery is stored, it should receive a refresh-
ing charge every 4 weeks up to a fully charged condi-
tion,
12.GENERAL PRECAUTIONS ABOUT WARRANTY
DEAR AKSA GENERATIOR SET OPERATOR,
PLEASE TAKE CARE TO THE FOLLOWING ORDER
TO PREVENT THE GENERATOR SET WARRANTY
TO BECOME INVALID BEFORE THE TERMINA-
TION OF THE WARRANTY PERIOD AND TO EN-
SURE TROUBLE-FREE
OPERATION OF THE GENERATOR SET WITH A
LONG LIFE!
1- MAINTENANCE AND REPAIR WORKS
WILL NOT BE COVERED BY THE WARRANTY
CERTIFICATE,IF INVOICE OR DELIVERY CERTIFI-
CATE OF THE GENERATOR SET IS NOT SUBMIT-
TED.
2- THE WARRANTY OF THE GENERATOR SET
WILL BECOME INVALIDE IN CASE OF ANY IN-
TERVENTION OF ANY PERSON OTHER THAN
AUTHORIZED AKSA SERVICES OR BY PRIOR
WRITTEN APPROVAL FROM AKSA POWER GEN-
ERATION ON THE GENERATOR SET FOR ANY
REASON.
3- CONTROL AND MAINTENANCE WORKS IN-
DICATED IN THE PERIODICAL MAINTENANCE
SCHEDULE AND THE OPERATING MANUAL
MUST BE CARRIED OUT COMPLETELY AND
TIMELY THE FAILURES DUE TO INCOMPLATE OR
UNTIMELY MAINTENANCE ARE NOT COVERED
BY THE WARRANTY.
4- GENERATOR SET SHOULD BE INSTALLED AS
INDICATED IN THE INSTALLATION MANUAL
OTHERWISE, THE PROBLEMS WHICH ARE LIKE-
LY TO OCCUR WILL NOT BE COVERED BY THE
WARRANTY
5- CUSTOMER IS RESPONSIBLE FOR THE FAIL-
URES WHICH ARE LIKELY TO OCCUR IN CASE
THAT THE DIESEL OIL USED CONTAINS DIRT OR
WATER.
6- THE OIL TYPE INDICATED IN THE MAINTE-
NANCE MANUAL SHOULD BE USED IN THE EN-
GINE OTHERWISE, THE FAILURES WHICH ARE
LIKELY TO OCCUR WILL NOT BE COVERED BY
THE WARRANTY.