Akronym Morning MM-730 User Manual Download Page 14

26

27

We recommend descaling the Morning Machine at least once a 
year. The Morning Machine will prompt you to descale the machine 
after 600 cups.

You may use existing descaling products in the market, such as the 

Nespresso® Descaling Kit or the Caffenu® Descaling Kit.

① 

Descale the Morning Machine when the Machine is 

prompting you to descale (after 600 cups).

② 

Lift and close the lever to eject the spent capsule into the 

Used Capsule Container.

③ 

Empty the Used Capsule Container. 

④ 

Fill the water tank with fresh, filtered water, up to 0.5L. 

⑤ 

Add 1 sachet of your descaling liquid/solution of choice into 

the water tank.

⑥ 

Remove the Drip Tray and place a container (minimum 

volume of 1L) under the Coffee Outlet.

⑦ 

Go to 

MACHINE

 > 

SETTINGS

 > 

MAINTENANCE

 on the  

Morning Machine.

⑧ 

Run the Stage 1 maintenance program and follow  

on-screen instructions.

⑨ 

Run the Stage 2 maintenance program and follow  

on-screen instructions.

  If you need to refill the water tank during the process, fill 

until the MAX level.

  The Machine will show when the descaling is completed.
  During the decalcifying process, if you need to empty 

your container under the Coffee Outlet, you may pause by 
pressing the 

 

BACK

 button.

Descaling

Troubleshooting

PROBLEM

CAUSE

SOLUTION

No coffee is brewed.

The water tank is empty.

Fill the water tank with 
water until the MAX level.

The coffee is not  
hot enough.

Cup or mug might be cold.

Preheat your cup or mug.

Low temperature set for 
the recipe.

Set the ideal brew 
temperature for  
your recipe.

Scale build-up in  
the Machine.

Perform a descaling 
procedure.

Spent capsule did not 
drop down after raising 
the lever.

The Used Capsule 
Container is full.

Empty the Used  
Capsule Container.

The spent capsule is 
deformed after brewing.

Use a teaspoon to 
remove the stuck capsule 
from the brew chamber. 
Do not use a sharp 
object. The brew chamber 
may leak if damaged  
or scratched.

There is steam when the 
lever is raised.

The lever is raised too 
quickly after brewing.

Let the residual pressure 
escape for a few seconds 
before raising the lever.

There is water on  
your countertop.

The water tank is leaking.

Check the valve in the 
water tank to ensure 
that it is not stuck when 
removed. Check if the 
tank is seated fully in 
place in the Machine.

Drip Tray is full of water.

Empty the drip tray.

Summary of Contents for Morning MM-730


















Reviews: