Akron EXG 400 X, User Manual

Page: 37 / 106

37
EXG 400 X GRAIN BAG UNLOADER
SET UP FOR
EXTRACTION
6-g. Unwinding the Bag
The extractor includes a system to uncouple the
roll located on the inner side of the reduction
gearbox . The following pictures explain its
operation. Stop the tractor and remove the key
before working inside the machine or on top of it
in order to prevent serious accidents from
happening.
This way the roll can rotate freely, which allows
the grain bag to be unwound just by moving the
tractor forward. If it were necessary, the grain
bag should be held by some appropriate means
while it is being unwound.
The unwinding process is exactly the same if
cereal is extracted from only part of a bag. The
only difference is that the remains of the bag
must be used to seal it back, always caring for
cereal conservation.
Pull out the clutch handle (Fig 6.10).Turn the
clutch handle until the roll is disengaged (Fig
6.11).
WARNING: Before working on or inside
the machine, stop the tractor, and take
out the key to avoid serious accidents.
Figure 6.9 End of Figure
Figure 6.10
Figure 6.11