Akron EXG 400 X, User Manual

Page: 21 / 106

4. RECEIVING THE MACHINE
The grain extractor AKRON® modelo
EXG 400
X
is delivered almost ready for operation.Only a
number of verifications related to transport
issues must be taken into account upon
receiving the machine.
1) If the machine is delivered on a truck or other
vehicle, special care must be taken to remove all
the elements used to fix the machine to the
transport vehicle.
2) If the machine is delivered in tow, running on
its own wheels, the pressure of the wheels must
be checked to be at a reasonable level.
3) In both cases, the machine’s paint and
structure must be checked to be free from
damages that could have taken place during
transport. If that were the case, it would be
convenient to assess if the damage could
influence the machine’s normal operation or if its
integrity could be affected in the future.
4) All the machine components must be checked
to be present and in good operating conditions
and all the mechanisms should be operative.
5) All the safety guards and protections should
be present and in good conditions (e.g., the
lifting auger lock pin, the drawbar cover, etc.)
4-a. Identification of your Self-unloading
Grain Cart
When ordering replacement parts or requesting
technical assistance or information, always
provide the following details for product
identification purposes:
·
Model
·
Mass (kg)
·
Serial #
This information is engraved on the identification
plate, which is located as shown in Figure 4.1
above.
Please fill in your machine's data here for your
records:
NOTE:
The data, specifications and illustrations
in this manual are based on the information
available at the time it was written.
Due to the continuing improvements in the
design and manufacture of
AKRON® products,
MICRÓN FRESAR S.R.L.
reserves the right to
modify components and/or specifications
without prior notice.
Figures are only for illustration purposes, no
measures should be taken on the drawings
.
21
EXG 400 X GRAIN BAG UNLOADER
RECEIVING THE
MACHINE
MODEL
:
SERIAL #
:
MASS (KG)
:
4.1. Identification plate location