8
INSTALLATION AND USER MANUAL - GALLUS INGROUND
Installation of the safety net
AKROBAT HINT:
If you find it too difficult to get the toggles in place, wedge a
screwdriver carefully between the frame and PVC panel to
attach the toggle. Using a flat-head screwdriver (or similar),
push the loop end between the wall panel and frame. Insert
the toggle from underneath and rotate to secure. Repeat with
all ties.
Start assembling the safety net by inserting the
enclosure pole attached to the door (Part L)
into the frame part with T-socket.
1
2
3
Continue by inserting all of the poles into the sockets, all the
way stretching the bottom edge of the net, in order to make
sure that the safety net fits tightly around the trampoline.
NOTE:
If you find the net too short/long towards
the end, adjust the entire netting starting
from the door towards the last pole.
Insert the bottom part of the door and start
unrolling the safety net around the mat. Make
sure the net is not twisted. After unrolling the
entire net, insert the final pole in the socket
next to the door - be sure to close the door
on the inside of the trampoline before inserting
the last pole.
Start inserting the first pole left from the door.
Keep the bottom edge of the net stretched
before inserting the next enclosure pole. Take
the net near the door and pull tightly towards
the first pole before inserting the pole through
the net and into the socket.
To assemble the top frame., take the shorter top
frame part with a hole in the middle (Part H).
This pole should be attached above the door and
tightened with the connector screw into the top
of the enclosure pole.
Continue by attaching two top frame parts
together, then taking a connector screw and
tightening it into the top of the enclosure pole.
Important:
There are two sizes of top frame parts
– alternate them according to the
frame legs above which the longer top
frame parts should be placed.
