9.3.- Access code (password)
It allows protecting the configuration of the unit using a 2 digit code (from 01 to 99). If it is active a code is requested
when you try to access the programming menu. This menu cannot be accessed if a wrong value is entered. The code is
defined using the
Access password
parameter of the
q
menu.
The
Password to Set Point
parameter defines if this code is requested on changing the set point.
9.4.- Parameter transfer
This function allows transferring the programmed parameters of a device to others, using the
AKO-14923
programming key. This will save a lot of time when configuring similar devices.
The
AKO-14923
key does not require an external power supply, and is powered by the device itself.
Disconnect the unit power supply.
Connect the programming key in the parameter server connector.
Connect the unit power supply.
In the programming menu, select the option
q
/Transfer parameters/Send.
Disconnect the unit power supply.
Disconnect the device programming key.
9.4.2 Transfer parameters from the key to the device
Disconnect the unit power supply.
Connect the programming key in the parameter server connector.
Connect the unit power supply.
In the programming menu, select the option
q
/Transfer parameters/Receive.
Disconnect the unit power supply.
Disconnect the device programming key.
9.5.- Return to initial parameters
This function configures all the unit's parameters to its default values,
i.e., as it leaves the factory. The date and time data are not changed.
To return the unit to the initial parameters, select the
q
/
Initial parameters
/Yes in the programming menu.
WARNING:
Any change made in the unit's configuration will be lost.
9.6.- Program version
The
Program version
parameter in the
q
menu allows displaying the firmware version installed in the unit.
Use this information if you have to ask for advice from the technical assistance service.
9.4.1 Transfer parameters from the device to the key
INPUT
ALARM
PROBES
RS485
1
NC NO
1
2
2
B
A
GND
Conector de servidor
de parámetros
SET
¿
ESC
21 22 23 24 25 26 27 28 29
30 31 32 33 34 35
24
