[AKD7756-HF]
<KM101400>
2010/06
- 9 -
8 bands adjustments can be made in RUN state by GUI.
Figure 5. Control S/W [PEQ] tab screen
(1) Select [PEQ] tab to open Equalizer dialogue.
(2) Push down the [USE] button to write this operation setting to the DSP.
Set the initial address of the PEQ band, which need to be modified, to [ADDR].
Set quality factor of the filter to [Q].
Set a cutoff frequency of the filter to [FREQ].
Use the [Type] pull-down menu box to select a filter type.
When filter type is “DIP”, the slid bar is available for setting.
(3) This function is enabled only when CODEC and DSP buttons are pushed down (CODEC and DSP are in RUN
state).
(1)
(2)
(3)
