[AKD7756-HF]
<KM101400>
2010/06
- 6 -
CONTROL SOFTWARE MANUAL
■
Evaluation Board and Control Software Set-up
1) Connect the AKD7756-HF to the USB control box.
2) Connect the AC-DC adaptor to the +12V port of the AKD7756-HF.
3) Connect the USB control box to a PC with USB cable.
The USB control box is recognized as HID (Human Interface Device) on the PC. When it can not be recognized correctly
(e.g., recognized as an unknown device), please push the reset button (yellow) of the USB control box.
4) Insert the attached CD-ROM into the CD-ROM driver of the PC. Access the CD-ROM and execute
“AK7756HF.exe”.
5) When using Bluetooth, connect a mobile phone to Bluetooth Module. Refer to the evaluation flow of
above-mentioned in Bluetooth mode.
Figure 2. Startup Screen of the Control Software
Note: The software must run again when disconnecting a USB control box from the PC.
