[AKD4953A-B]
<KM104800>
2010/10
- 9 -
AK4953A Control Soft Manual
■
Evaluation Board and Control Soft Settings
1.
Set an evaluation board properly.
2.
Connect the evaluation board to an IBM PC/AT compatible PC by a 10wire flat cable. Be aware of the direction of
the 10pin header. When running this control soft on the Windows 2000/XP, the driver which is included in the CD
must be installed. Refer to the “Driver Control Install Manual for AKM Device Control Software” for installing
the driver. When running this control soft on the windows 95/98/ME, driver installing is not necessary. This
control soft does not support the Windows NT.
3.
Then please evaluate according to the following descriptions.
■
Operation Screen
1.
Start up the control program following the process above.
2.
After the evaluation board’s power is supplied, the AK4953A must be reset once bring SW1 (toggle Switch) “L”
to “H”, and Click [RESET] button.
3.
The operation screen is shown below.
Figure 7. Window of Control Soft
Summary of Contents for AKD4953A-B
Page 34: ...AKD4953A B KM104800 2010 10 34 fs 44 1kHz Figure 36 Crosstalk Plot Input level 1dBFS...
Page 39: ...AKD4953A B KM104800 2010 10 39 fs 96kHz Figure 45 Crosstalk Plot Input level 1dBFS...
Page 44: ...AKD4953A B KM104800 2010 10 44 fs 96kHz Figure 54 Crosstalk Plot Input level 1dBFS...
Page 49: ...AKD4953A B KM104800 2010 10 49 fs 96kHz Figure 63 Crosstalk Plot Input level 1dBFS...
