[AKD4753-A]
1-4-3. Indication of a frequency characteristic
A frequency characteristic is displayed when push a [F Response] button. Then, a register set point is also
updated.
Change "Frequency Range", and indication of a frequency characteristic is updated when push a [UpDate]
button.
Figure 26. A frequency characteristic indication result
Followings are the cases when a register set value is updated.
(1)
When [Register Setting] button was pushed.
(2)
When [F Response] button was pushed.
(3)
When [UpDate] button was pushed on a frequency characteristic indication window.
(4)
When set ON/OFF of a check button “HPF LPF Enable”, “HPF” ,”LPF”,“EQ1”, “EQ2”, “EQ3”,
“EQ4”, “EQ5”
KM103902
2011/01
- 20 -
