ASAHI KASEI
[AKD4569]
<KM074000>
2004/02
- 6 -
AK4569 Control Program operation manual
n
Set-up of evaluation board and control software
1.
Set up the AKD4569 according to above mentioned setting.
2.
Connect IBM-AT compatible PC with AKD4569 by 10-line type flat cable (packed with AKD4569). Take care of
the direction of 10pin header. (Please install the driver in the floppy-disk when this control software is used on
Windows 2000/XP. Please refer “Installation Manual of Control Software Driver by AKM device control software”.
In case of Windows95/98/ME, this installation is not needed. This control software does not operate on Windows
NT.)
3.
Insert the CD-ROM labeled “AK4569 Evaluation Kit” into the CD-ROM drive.
4.
Access the CD-ROM drive and double-click the icon of “akd4569.exe” to set up the control program.
5.
Then please evaluate according to the followings.
n
Operation flow
Keep the following flow.
1.
Set up the control program.
2.
Click “Port Setup” button.
3.
Then set up the dialog and input data.
n
Explanation of each buttons
1.
[Port Setup] :
set up the printer port.
2.
[Write default] : initialize the register of AK4569.
3.
[Function1] :
Dialog to write data by keyboard operation.
4.
[Function2] :
Dialog to evaluate IPGA and ATTL/ATTR/ATTM.
5.
[Write] :
write data to each register.
