akira LCT-20CHST, Service Manual

Page: 48 / 48

Put on
pyrocondensation
Wiring horness
Yellow/ green
Umber
Blue
The wiring connection diagram of
power supply socket
1. Connect each wiring horness and plug with cord according to final wiring connection
diagram.
2. The assembly position of each wiring horness and plug with card are confirmed by
technologist and fix then at proper location.
3. The paste location of certificate and breakable label is confirmed by technologist
make sure the consistency of location.
4. Suspending panel is covered by protective film.
5. Paste insulative board onto transition assembly, then install built-in power supply
module.
6. Check if each bottom could mark, if so, protect the four corners of the front frame with
blue adhesive tape. The method is confirmed by technologist.
Make sure the side with mark "O" should be forward the display panel then installing the
power supply switch.
-
48
-
Model No.: LCT-20CHST
Version: 1.0
EXPLODED VIEW