akira LCT-20CHST, Service Manual

Page: 36 / 48

-
36
-
Model No.: LCT-20CHST
Version: 1.0
FACTORY MODE
The method of Entering into factory mode:
Turn down the volume to 0, press down the key of “mute” in remote control, then press the key of
“menu” in remote control. press CH+ and CH- choose the items which need to adjust.
The method of exiting from factory mode:
Press the in remote control, after exiting from the factory mode, you should turn on the TV
again.
Now the introduction of the modes which are often used is below, the others are design parameter
mode, not permit to modify.
M6
The fast key is the key of “language”
IFPL Adjust the scale of picture and sound the IF signal
M6 The fast key is the key of “language”
TOP Tune AGC voltage
M13 The fast key is the key of “DVD”
DVD The switch of DVD source
DPF The switch of DPF source
M17
LOGO LOGO display or not
BLUEBACK Blue screen switch
M24
AUTO
Auto revise
M25 The fast key is the key of “title”
INIT Initialization program
M28 The fast key is the key of “0”
IIC BUS OPEN Open bus