8
WARNINGS AND PRECAUTIONS
It is mandatoryto follow the following instructions before and during use
of the MINI ADA Social
Robot.
1.
Read the instruction manual before starting the use of the robot. Follow allinstructions.
2.
Make sure that the ground on which the robot will move isflat, dry and
smooth. Do
not
operate or release the robot in sloping
areas, ramps, wet floors
and rough areas of the
surface. Otherwise, tipping may occur, endangering product safety and the safety of
those around it.
3.
The robot weighs about 50 kg and once activated, it interacts with itssurroundings.
It
can move back and forth, raise its arms, lower them, move its head. Even
if sensors
that
recognize the
obstacles
around
the robot prevent the robot from damaging it, the robot
should not be approached more than 1
(one)
meter. Otherwise, it may cause undesirable
injuries.
4.
The robot is equipped with a completely electronic design and there should be
absolutely no water contact with
the robot. Otherwise, heating, deterioration,
flammable effects may occur
in the working
parts.
5.
Never throw a foreign object into the robot.
6.
The
robot should be closed during
cleaning
and cleaning should
be
done with the help of a
dry,
softcloth. Chemicals
containing alcohol and
ammonia should never be used.
7.
The robot must be operated and maintained in the temperature and temperature range
included in the specifications. Otherwise, working parts may be damaged.
8.
The robot is designed for indoor use. Sun temperature, rain, snow, humidity should not
be exposed.
9.
The robot should never be operated or moved during charging.
10.
When a heating problem is observed above the working temperature of the
robot during
operation, the robot should be closed immediately and help should be obtained by
calling technical support.
11.
No clothing should be made on the robot. Fan gaps on the robot should never be closed.
Otherwise, fire danger may occur due to high heat, the robot may become inoperable.
12.
Do not use the worn and damaged power cord
13.
If the lithium-ion battery inside the robot is damaged and leaking, never interfere
and
call technical support for help.
