04242020-BR
5
Attention:
Do not proceed with the Edge Trim installation until making sure there are no
ripples in the material.
Edge Trim Installation
Step 11.
Place the Edge Trim over each end of the frame and secure with M5x12 screws (D). Start with the center
points first, then the rest of the corners as shown below.
Installation
Step 11.
Measure the overall length and height of the frame and drill holes for the Brackets (F). Line up the wall
brackets with the drilled holes on the installation location and screw them in using a Phillips screwdriver. If not
installing into a structural wood stud, use a hollow wall Anchor (H), then screw in the Wood Screws (H) with a
screwdriver. Make sure the brackets are leveled.
Step 12.
Position the fixed frame screen onto the top wall brackets as shown below and push down at the center of
the top of the frame to secure.
Step 13.
Repeat the same process for the Bottom Brackets (K) by marking the drill-hole area on the wall where
they will be installed. Make sure the brackets are flipped the opposite way mirroring the top brackets. Line up the
bottom wall brackets with the drilled holes on the installation location and screw them in using a Phillips
screwdriver as shown below.
