04242020-BR
3
Step 3
. Using the Center Joint (A) connector, connect 2
horizontal frames and securely fasten with Allen key (G). Do
the same to the other set of horizontal frames.
Step 4.
Insert the Elbow Joints (C) to top and bottom sections
of the vertical frame. Once inserted, secure the Elbow Joints
(C) by fastening them with the Allen key (G) and connect the
vertical sections to the horizontal frame. Make sure all
corner frame pieces are flush (no gaps). They should
form perfect right angles.
Do not tighten completely until all frame pieces are
assembled correctly.
Note: You may have to loosen and adjust the brackets
and frame pieces. It will help to leave the screws loose until perfect right angles are formed, then tighten the screws
securely.
To prevent permanent damage to the screen material, be sure your hands are clean for the next step.
Step 5.
Place the assembled frame to the side and
carefully unroll the screen material face-down on
top of a soft-clean cloth.
Step 6.
Insert the four horizontal and two vertical
Tension Rods (I) into the corresponding sides of the
screen material, while keeping the material lying
flat. Careful not to snag on the holes at the edge of the material during this process; forcing the rods may damage
the screen material.
Back side
Back side
Back side
Back side
