2 Description
17
2.2 Unpacking
2.2.1Handheld
System:
2.2.2 Bodypack
System:
2.3. Optional
Accessories
2.4 SR 40 Receiver
2.4.1 Front Panel
Controls
Refer to fig. 1.
Refer to section 2.7
Color Code Table.
2.4.2 Rear Panel
Controls
Refer to fig. 2.
Two different WMS 40 Systems are available:
Please check that the packaging contains all system components as
listed above. If anything is missing, please contact your AKG dealer.
RMU 60 19” rack mounting kit
for 2 SR 40 receivers
CH 40 plastic carrying case
for one complete WMS 40 system.
The SR 40 is a stationary non-diversity receiver for use with all WMS 40
transmitters. The SR 40 operates on one fixed, quartz stabilized fre-
quency in the 710 MHz to 865 MHz UHF carrier frequency range and
features a rack-mount case.
1
POWER:
On/off pushbutton switch and indicator LED.
2
Antenna:
Fixed-length UHF antenna permanently mounted on the
front panel.
3
VOLUME:
This rotary control adjusts the SR 40’s output level from
microphone to line level for matching to the input sensitivity of your
mixer or amplifier.
4
RF:
This LED lights to indicate that signal is being received. If no
signal is received or the squelch is on, the RF LED goes out and
the audio output is muted.
5
Color Code:
The color indicates the carrier frequency of your
receiver. Transmitters tuned to the same frequency are marked
with identical colors.
6
Carrier Frequency Label:
A label indicating the carrier
frequency and approval marks of your receiver is affixed to the rear
panel of the receiver.
1 SR 40
Receiver
1 AC power
adapter
for 12 V DC
1 screwdriver
1 HT 40
Handheld
Transmitter
2 AA size 1.5 V
dry batteries
1 stand adapter,
black color
code clip
1 SR 40
Receiver
1 AC power
adapter
for 12 V DC
1 screwdriver
1 PT 40
Bodypack
Transmitter
2 AA size 1.5 V
dry batteries