New Features and enhancements:
•
New 1 Click Setup Calculation algorithm which will find a higher count
and more robust frequencies
•
1 Click Setup Xpert allows advanced options like excluding frequency
ranges, TV channels or single frequencies from calculation
•
Support of DSR700 V2 and SST4500 IEM
•
RF Monitor allows recording of RF data from all devices
•
General improvements and enhancements at the System Architect
plug-in
Unsupported features and know issues:
This chapter explains which features are not supported at which firmware
version of AKG devices:
General:
•
After loading of Venue files audio and RF meters are not working
--> Closing all Custom control panels and docking and floating the
product panel or master control panel solves the problem.
DSR700
•
SYSTEM ARCHITECT WORKS ONLY WITH DSR700 FIRMWARE 2.1 OR
HIGHER
•
IT IS RECOMMENDED TO UPDATE ALL DSR700s TO A NEWER/HIGHER
FIRMWARE VERSION (Firmware 2.1 is included at System Architect 3.4)
--> Please use the Firmware Update tool within the AKG HUB4000 Q
panel to update DSR700
--> go to HUB4000 Q Panel/Menu/Tools/Firmwareupdate
--> or contact
for further help
•
Mismatching stripes/devices can just resolved with receiving settings
from hardware device
SST4 - Firmware version 3.30:
•
SYSTEM ARCHITECT WORKS ONLY WITH LATEST INCLUDED SST4 and
SST4500 IEM FIRMWARE
--> Please use the Firmware Update tool within the AKG HUB4000 Q
panel to update SST4
December 2012
Page 27
HUB4000 Q – Quickstart Guide
