16
C
4000
Specifications
Type:
1-inch dual diaphragm pressure gradient microphone
Polar patterns:
omnidirectional, cardioid, hypercardioid
Sensitivity at 1000 Hz:
25 mV/Pa (-32 dBV ±2 dB)
Frequency range:
20 to 20,000 Hz (refer to frequency response curves)
Electrical impedance:
200 Ohm
Recommended load impedance:
1.000 Ohm
Bass cut filter slope:
12 dB/octave below 100 Hz
Preattenuation pad:
-10 dB, switchable
Equivalent noise level to IEC 60268-4:
22 dB
Equivalent noise level to IEC 60268-4 (A-weighted): 8 dB-A
Signal/noise ratio re 1 Pa (A-weighted):
86 dB*)
Max. SPL for 0.5% THD (0/-10 dB):
350/1000 Pa
Z
145/155 dB SPL*)
Dynamic range:
137 dB (A-weighted)*)
Environment: - temperature:
-
relative
humidity:
-10°C to +60°C - (14°F to 140°F)
90% (+20°C/68°F), 85% (+60°C/140°F)
Power requirement:
9 to 52 V phantom power to IEC 61938
Current consumption:
2 mA
Connector pinout:
3-pin male XLR to IEC standard
Size:
max. dia.: 58 mm (2.3 in.), length: 183 mm (7.2 in.)
Net weight:
450 g (1 lb.)
*) Values for 48 V phantom power; reduce by 6 dB for 24 V and 18 dB for 12 V phantom power.
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of
the Declaration of Conformity for this product, visit http://www.akg.com or contact [email protected].
7
Specifications
20120403_BDA C4000 (5018378)_PRINT.pdf Release 1.0