6 Specifications
Type:
condenser microphone (self-polarized)
Polar pattern:
omnidirectional (hemispherical)
Frequency response:
20 Hz to 20 kHz (installed in very large boundary)
Sensitivity at 1000 Hz:
20 mV/Pa (-33 dBV) re 1 V/Pa (measured on 1.5 x 1.5 m
boundary)
Max. sound pressure level for 1% THD:
130 dB SPL
Equivalent noise level to IEC 60268-4 (A-weighted):
16 dB(A)
S/N ratio re 1 Pa (A-weighted):
78 dB
Electrical impedance:
≤ 600 ohms
Recommended load impedance:
≥ 2000 ohms
Powering:
9 to 52 V phantom power to IEC 61938
Current consumption:
approx. 2 mA
Connector:
phantom power adapter with integrated male 3-pin XLR
connector
Size:
0.8 dia. x 0.12 (1.1) in. (20 dia. x 3 (28) mm)
Net weight:
approx. 1.1 oz. (30 g) (without cable)
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of the Declaration
of Conformity for this product, visit http://www.akg.com or contact [email protected].
Frequency Response
Polar Diagram
Dimensioned Drawing
17
C 562 CM
C 562 CM_Manual_D031001 02/09/2010 10:44 Seite 17 (Schwarz/Black Auszug)