Specifications
Type:
1-inch large-diaphragm pressure
gradient microphone
Polar patterns:
cardioid
Sensitivity at 1000 Hz:
25 mV/Pa
-32 dBV ±2 dB
Frequency range:
20 to 20,000 Hz (refer to frequency
response curve)
Electrical impedance:
≤
200 ohms
Recommended load impedance:
≥
1000 ohms
Bass cut filter slope:
6 dB/octave below 500 Hz
Preattenuation pad:
-10 dB, switchable
Equivalent noise level
to DIN 45 405 (CCIR 468-2):
25 dB
Equivalent noise level
to DIN 45 412 (A-weighted):
14 dB-A
Signal/noise ratio re 1 Pa
(A-weighted):
80 dB*)
Max. SPL for 0.5% THD (0/-10 dB): 200 / 630 Pa
140 / 150 dB SPL*)
Dynamic range:
126 dB (A-weighted)*)
Environment:
- temperature: -10°C to +60°C
- (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F),
85% (+60°C/140°F)
Power requirement:
9 to 52 V phantom power
to DIN 45 596/IEC 268-15
Current consumption:
≤
2 mA
Connector pinout:
3-pin male XLR to IEC standard
Size:
max. dia.: 53 mm (2.1 in.),
length: 162 mm (6.4 in.)
Net weight:
320 g (14.1 oz.)
*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for
12 V phantom power.
This product conforms to standards EN 50 082-1 and EN 60 065.
Frequency Response Curve
Polar Pattern
7
