
Operation
AMM 10
53
The
CONTROL OUT
module is an output module with a headphone socket.
Use of this output module is especially recommended to help inexperienced operating
personnel set levels. The result can be acoustically checked via the headphone output, unless
the audio is played back in the same room anyway.
The front panel contains a volume control and a 6.3 mm headphone jack socket. In addition, 8
LEDs indicate the current signal level on both stereo channels.
Maximum number within the AMM 10 system:
Up to 10
CONTROL OUT
modules can be used, provided the power supply is adequate.
The front panel of the
AUX/LINE OUT
output module has two stereo phono sockets (L, R) and
a 3.5mm stereo output jack socket. The recording level can be set via the volume control. This
is dependent on the input controls of the input modules, but independent of the master
volume setting.
As a special feature, the
AUX/LINE OUT
module has a pre-attached connection cable which
connects this module to the
MASTER CONTROL
. Therefore,
AUX/LINE OUT
cannot be more
than one slot away from the
MASTER CONTROL
.
Maximum number within the AMM 10 system:
Only one
AUX/LINE OUT
module can be used.
CONTROL OUT
REC OUT