Installation and Connection
AMM 10
47
1)
Undo the two screws on the underside of the
AUX/LINE OUT
or
LINE OUT
module. These
screws fasten the black cover plate on the underside and the metal strain relief clip on
the upper side.
Figure 20: Unscrewing the base plate
2)
Remove the four blue jumpers from the upper side of the circuit board and mount the
transformer module in their place.
Figure 21: Removing jumpers
NOTE
Jumpers
After removing the jumpers, keep them in a safe place in case you want to remove the TRAFO
OUT module in the future. In that case, put the four blue jumpers back in their original position.