Introduction
3 (16)
Sesam 800 K3 RXDIN USA Manual
Document-ID: 946415-000
Version: A0
Author: SH
1
Introduction
This manual only covers the installation of the Sesam radio remote door
opening system. The Sesam System is not a complete door opening system:
it provides only the set of outputs that are driven according to the actions
performed by the operator of the transmitter. The way the set of outputs is used
for controlling the doors depends on the specific installation and is outside the
scope of the Sesam.
The approvals that the Sesam radio remote control system is only valid for the
system itself.
The complete remote control system, where the controlled object is one part,
has to be tested and approved according to the standards/norms that are ap-
plicable and specific to the controlled object. It is not the responsibility of
Åkerströms Björbo.
2
Scope
The following guide must be used when installing Åkerströms Sesam door
opening system to ensure secure, safe operation. The installation must be car-
ried out by a certified electrician.
FCC Part 15 and Industry Canada RSS Notice
This device complies with Part 15 of the FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any
interference that may cause undesired operation of the device
RSS FCC Partie 15 et du Canada Avis à
Industrie
Cet appareil est conforme à la Partie 15 des règlements de la
FCC et Industrie Canada
exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit
accepter toute interférence pouvant causer un mauvais fonctionnement du dispositif
WARNING:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
ÅKERSTRÖMS BJÖRBO CORPORATION COULD VOID THE USER`S
AUTHORITY TO OPERATE THE EQUIPMENT.
