28
ENGLISH
multi functional button. Both intercom partner can always go back to intercom mode
by pressing the multi functional button again.
When having a triple connection (HFP, A2DP and intercom) it is possible, depending
on type and utilization rate of the Bluetooth devices, to get occasional interruptions
after switching from HFP to A2DP (phone or GPS to music). This problem can usually
be solved by shortly switching to intercom and back.
Communication from vehicle to vehicle
The specially for helmets developed systems are operating with low radiation and
therefore cause no health hazards but still provide a range of up to 250m (free field).
This it is possible to get a voice connection between two motorbikes.
Possible malfunctions and there cause
.
Important safety advices
For frequent mobile phone users we recommend to use our fit-for-motorbike
hands-free kits
CONNECT 10
or one of our high-quality
PowerCom
- motor-
bike communication systems, where amongst others, the fit-for-motorbike hands-
free kits for mobile phones are integrated.
Driver should not operate the device while driving!
Call only with hands-free kit and use the automatic call acceptance of your
mobile phone if you want to answer calls while driving.
Absolutely do not use a higher volume than necessary!
With a high volume your hearing can get damaged. Additionally, the driver’s
concentration on the traffic is not ensured any more!
If the same phone / GPS is paired with both intercom partners, operation problems
are possible! (For remove see: "Secure delete of existing pairings")
Interferences and interruptions: Radio waves of the Bluetooth frequency (2,4 GHz)
are sometimes highly reflected by buildings and this might lead to a fluctuation of
field intensity. Interferences or interruptions might be possible.
Start-up signal can be heard but device remains silent: Bluetooth helmet set is on
standby, please press multifunctional button once.
Volume is too low: Check microphone and loudspeaker assembly (correct
position).
Feedback effects: Turn down the volume and turn on the intercom only when the
helmets are on the head
Inexplicable malfunctions: Reset system, shortly interrupt the connection to the
battery and restart the Bluetooth helmet set (when cutting don't pull at wires).
Summary of Contents for Stealth Bluetooth Helmet Set NG
Page 16: ...16 DEUTSCH Notizen...
Page 17: ...17 ENGLISH...
