![AKE PowerCom plus Series Operating And Installation Instructions Download Page 28](http://html1.mh-extra.com/html/ake/powercom-plus-series/powercom-plus-series_operating-and-installation-instructions_2885088028.webp)
Hands-free kit via smart connection
All
PowerCom plus
versions with smart connection can also be connected to
devices that require a duplex and a stereo connection. This can be for example
Smartphones, or other combi-devices. The connection can be made either via
optional connection cable or Bluetooth.
Bluetooth Accessory
Adapter PB-AA D&S
Please remove the protective cap at the PowerCom control device, marked [S] or
[U. Plug in the adapter and slide the supplied weather protection centrically over
the plug connection. Now take the cable (not close to the ignition wires) and
connect the other end with your mobile or smartphone.
The fit-for-motorbike hands-free kit with smart control will provide you with the
following combinations for your convenience:
Automatic volume control of the mobile phone signal depending on road
noise.
If applicable, volume lowering of the audio signal (music) and the
navigation system signal possible while using the mobile phone.
Automatic modulation adjustment depending on driving noise or with
trimmer for optimum transmission.
Universal modulation output will recognize the technology of the mobil
phone and adjust automatically.
Voice control is possible (depending on mobile phone).
ignal controling the Bluetooth-to-Helmet connection.
The mobile or smartphone will recognize the PowerCom system as headset. For
further information regarding the mounting of mobile phones, etc., please read
the operating and installation instructions of the equipment used.
All PowerCom versions with hands-free kit for two-way radio offer also the possi-
bility to connect a camcorder or a dictating machine. The connection is provided
with an optionally available adapter. Very nice is for example to make a life
With Zumo 660, the microphone cable connection is blocked with
received phone signal (even with background noise). This may make the
impression that the voice has breaks or is not to hear from the partner!
For the Bluetooth connection we recommend our
. In all variants of the new PowerCom plus Bluetooth
series, with the PB-AA D&S the Bluetooth connection to the helmet automatically
switched to stereo when no duplex voice connection is required (eg music from
your smartphone when driving solo).
Connection of a dictating machine or camcorder, etc.
o
o
o
o
o
o
With Bluetooth Accessory Adapter PB-AA D&S additional demand-depen-
det stereo/duplex-s
28
E
N
G
L
IS
H
Summary of Contents for PowerCom plus Series
Page 17: ...17 ENGLISH ...