11
CONNECT VENT SYSTEM
For vented installation only:
1. Install transition on top of hood (if removed for shipping) with M5 X 12 screws.
A. Air outlet
B
.
M5 X 12 screw
C. Remove the tape from the flapper
2. Install exhaust pipe.
COMPLETE INSTALLATION(FOR NON-
VENTED(RECIRCULATING) INSTALLATION ONLY
Step 1: Do not install exhaust pipe, remove the grease filters, locate the blower inside the hood
Step 2: Attach the carbon filters to both sides of the blower
Step 3: Twist the carbon filter until it is in the locking position
Step 4: Reinstall the grease filters, reconnect the power.
