HSUPA 3G Modem Setup Manual
Updated until firmware 404z & AKCess Pro Server 11.1.0
-
24 -
Basic notification setup for AKCess Pro Server (SMS)
Please note: the HSUPA 3G modem doesn’t support voice alert notifications.
When the device is connected and successfully configured, you can start AKCess Pro Server:
We will show you how to set up an SMS notification when the ‘host status’ virtual sensor goes
offline using the 3G modem. The modem will be connected to the USB port of the test machine
where AKCess Pro is installed.
After setting up this notification, you should be able to receive a text message from AKCess Pro
informing you that your securityProbe is offline. You are then able to take immediate action. With
notifications, you can then be able to monitor your sensors anytime and anywhere.
This tutorial provides you the information needed to setup the SMS notification feature.
To get to the starting point of this tutorial:
•
Connect the modem to the PC/Server’s free USB port
•
Let the modem successfully install and configure itself
