EDGE 180M USB Modem Manual
- 7 -
In the next screen you will name your action and add your mobile phone number, or your
list of mobile phone numbers that your SMS alert will be sent to. You can add multiple
numbers in the call list. There is no limit to the amount of numbers you can add, however
the more numbers you had the longer it will take to finish sending the alert out as the
SMS action will call to the first number and after finishing will call to the second number
and so on.
IMPORTANT NOTE: If you setup multiple SMS actions or alerts in the same notification
this will cause
the “SMS Queue Full” error.
For example; If you have multiple mobile numbers and you setup each SMS action to
send to only one number then this will cause this problem.
If you are using your current notification setting like this it causes the securityProbe to
connect to the phone number an equal amount of times for each action (for example; one
notification has 20 SMS actions, meaning the device needs to call out and connect to
service provider 20 times). This causes the SMS queue to be full causing the error.
What you need to do is change the setting to send one SMS action to send the SMS
message to multiple numbers, this will decrease the number of connections to the service
provider.
After you have finished adding the mobile numbers to the call list click the “Next” button
as shown above.
