17
R
3. Head rest after assembly
CHEST PELOTTE (concerns standing frame and chair)
In order to adjust the chest pelotte loosen up the screws L located at
the back of the standing frame, place the support in required position
and tighten the screws.
PELVIS PELOTTE (concerns standing frame and chair)
In order to adjust the pelvis pelotte loosen up the screws M located at
the back of the standing frame, place the support in required position
and tighten the screws.
CHEST VEST AND PELVIS BELT (concerns standing frame and
chair)
The length of the belts is adjusted with clips. Pay attention to place the
chest vest exactly in the middle of the chest and the pelvis belt on the
trochanter level. Make sure the neckline of the vest is up
ANGLE OF BACK REST (concerns standing frame and chair)
In order to adjust the angle of the back rest loosen up the screw L, set
the required position and fasten the screws.
