72
Chapter 8—Using Multis
Z4/Z8 User Guide—Version 1.0
Applying FX to Parts
Parts can be routed to the internal FX as follows.
1
Select a Multi, as explained on page 67.
2
Press “FX.”
The FX page appears, as shown below.
3
Select a parameter of the Part you wish to set, and use the JOG dial to set
the parameter.
Fx:
A, B, C, D, AB, CD, OFF) Use the JOG dial to select on of the options. The output
of each Part can be fed to an individual FX Send, a pair of FX Sends, or switched off. The
FX type for each FX processor is set in FX mode. See “Using FX” on page 78 for more
information.
Note that the “AB” and “CD” options are intended for adding FX to stereo Samples.
Note that a Keygroup’s FX settings in Program mode must be set to “MULTI,” for the
settings on the FX page to work. See “Configuring Keygroup Programs” on page 51 for
more information.
Send(dB):
Use the JOG dial to set the FX Send level.
Copying Multis
Multis can be copied as follows.
1
Press the MULTI button, then select the MAIN page shown below.
2
Press the WINDOW button.
The Multi window appears, as shown below.
3
Press “COPY.”
The Copy Multi window appears, as shown below.
Summary of Contents for Z4
Page 106: ......
