Akai PT50DL24, Owner'S Instructions Manual

Page: 33 / 120

English - 33
Changing Channels
Using the Channel Buttons
When you press the CH or CH button, the TV changes channels in sequence.
You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.
Using the “-” Button
The “-” button is used to select stations that broadcast both a digital and analog signal.
For example, for channel 7-1
(digital), press “7”, then “-”,
then “1”.
For channel 7-2 (analog), press
“7”, then “-”, then “2”.
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last channel you were watching.
Press the CH or CH button to change channels.
Press the number buttons to go directly to a channel. For example, to select channel 27, press
“2,” then “7.” The TV will change channels when you press the second number.
NOTE
• HD indicates the TV is
receiving a Digital High
Definition signal.
SD indicates the TV is
receiving a Analog
standard definition
signal.
DTV Air
7-1
1080i 16:9
English
Picture Mode : Dynamic
Sound Mode : Custom
MTS : English
Caption : Off
V-Chip : Off
12:00 am
Air 7-2
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Mono
Caption : Off
V-Chip : Off
12:00 am
BP68-00548B-00Eng(026~047) 5/17/06 1:48 PM Page 33