33
Wide
Sets the picture to 16:9 wide mode.
Panorama
Converts regular 4:3 aspect ratio screen to
widescreen.
Zoom1
Magnifies the picture vertically on screen.
Zoom2
Magnifies the size of the picture more than
Zoom1.
Stretch
Moves the Zoom2 picture up a little to fully
show the bottom. Use this picture size if you
want to view the Zoom2 picture along with
captions when watching movies.
4:3
Sets the picture to 4:3 normal mode. This is a
standard PDP screen size.
Changing the Screen Size
(When entering the Video mode)
Caption
Note
• In VIDEO, S-VIDEO, and Component1 modes, all screen modes can be selected.
(Wide
➝
Panorama
➝
Zoom1
➝
Zoom2
➝
Stretch
➝
4:3).
When you press the Aspect button on the remote control, the PDP’s screen mode should appear in
sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time(over 2 hours), an image may be burned
onto the screen, View the monitor in Wide or Panorama mode as much as possible.
32
Changing the Location of the PIP Image
1
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
2
Move the joystick up or down to select “Locate”,
then move the joystick left or right to enter.
3
Move the joystick to move the PIP screen where you
want.
4
Press the Menu button to exit.
PIP
Select
On
Locate
Source
Move Adjust Exit
PIP
Select
On
Locate
Source
Move Adjust Exit
Adjust Exit
PIP
Quick way to access the PIP location: Just press
“Locate” in the cover on the remote control.
!
