Akai LT-2605AB, User Manual

Page: 19 / 32

Introduction
Thank you very much for your purchase of our product of LCD TV. It serves as
a normal colour TV and PC monitor. To enjoy your set to the full from the very
beginning, read this manual carefully and keep it handy for ready reference.
INSTALLATION
① Locate the receiver in the room where direct light does not strike the screen. Total
darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
② Allow enough space between the receiver and the wall to permit ventilation.
③ Avoid excessively warm locations to prevent possible damage to the cabinet or
premature component failure.
④ This TV receiver can be connected to
AC100-240V~50/60HZ.
⑤ Do not install the receiver in a location near heat sources such as radiator, air
ducts, direct sunlight, or in a place somewhere like close compartment and close area.
Do not cover the ventilation openings when using the set.
⑥ The indicator light will last about 30 seconds to go out after cutting off the
electricity, during this period, you cannot repower it on until the indicator light goes
out, thanks a lot for your attention!
- 2 -