8
CD OR CD+G OPERATION
The unit designed to play CDs and CD+Gs bearing the
identification logo respectively. If the disc does not
confirm to the standard, it may not play properly.
TURNING ON/OFF
•
To turn on the CDG Machine, press the ON/OFF button once, the ON/OFF button will light up.
•
To turn off the system, press the ON/OFF button again the ON/OFF button will light off.
LOADING A DISC
•
Lift up CD Door to open CD/CDG compartment door. Place a CD/CDG disc in the compartment with
the printed side facing toward you.
•
Gently close the CD Door and slide the CD/ RADIO/ AUX selector to CD position.
•
The CDG Machine begins to read the disc. After that, press the PLAY/ PAUSE button to play the
disc. (If no disc is loaded, it will display “- - or E”. If CDG is loaded, the CDG indicator will light up).
NOTES:
Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit.
Only place one disc on the disc tray at a time.
Refer to the Trouble Shooting Guide “if a disc is loaded but the total tracks do not appear”.
PLAY/ PAUSE
•
To start playing, press the PLAY/ PAUSE button. The first track [01] will be displayed on the LED
display.
•
To temporarily stop playing, press the PLAY/ PAUSE button.
•
To resume play, press this button again.
PLEASE NOTE: Pressing pause repeatedly when a CDG is playing may cause distorted lyrics on the
monitor. Any distortion will remain until the whole screen is refreshed during an instrumental break or you
stop the song and start it from the beginning.
PLAYING CD OR CD+G DISC
•
Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.
•
Adjust MIC VOLUME/ A.V.C / ECHO/ BALANCE controls as needed to achieve the desired mix of
music and vocals through your sound system.
•
Do not press the disc cover of the CD compartment while it’s playing.
•
Never place anything except a compact disc on the disc tray. Foreign objects can damage the unit.
•
Do not apply excessive force to disc cover.
•
Only place one disc on the disc tray at a time.
MASTER VOLUME
Rotate to the MASTER VOLUME control to obtain the desired sound level.
NOTE: The MIC VOLUME must be adjusted simultaneously with the master volume level.
STOP MODE
If the STOP button is pressed during playback, the disc will cease to play. (The total number of tracks will
be shown on the LED display).
