10
Getting Started (Cont.)
Preparations
• All parts of the home theatre system must be placed on a stable, flat surface that
is strong enough to support the weight.
• Make sure to connect the system to a 240V~50Hz AC power supply.
• Press the
POWER
switch at the back of the unit and then press the
STANDBY
button on the front panel
.
• Press the
SOURCE or DVD/USB button on the remote control to select the input
audio source.
Adjusting the volume
• Rotate the
VOLUME
knob on the main unit, or press the
VOL
+/-
button on the
remote control, to adjust the volume.
NOTE: The volume level will be reset to the factory default value after restarting the
system. If a short circuit occurs on the front outputs, the machine will enter a
protect mode automatically. If this occurs, please turn the power off to check
and repair.
Mute
Press the
MUTE
button to mute the sound temporarily; press the
MUTE
button
again to restore the volume.
Adjusting the volume for the 5.1 speakers
The Front/Surround/Centre/Subwoofer volume can be adjusted using the remote
control.
• Press the
FRONT+/-, SURR+/-, CEN+/- AND SW+/-
buttons
to change the volume
individually.
