17
Playing a DVD
•
Connect the unit to your TV (or amplifier, if desired).
•
Switch on your TV set and select AV mode.
•
Plug the DVD Player into an appropriate power point and switch on power to
the outlet.
•
Press the
POWER button on the front of the unit or press the
POWER
button on the remote control of your DVD Player. The screen will display “READ”
if a disc is loaded, or “No Disc” if no disc is loaded.
•
Press the
OPEN/CLOSE button on the front panel of the DVD Player, the tray
will come out automatically.
•
Place a disc on the tray and press the
OPEN/CLOSE button to close the tray.
•
After using the unit, press the
POWER button on the remote control to switch
the unit into standby mode.
Functions
•
Unless indicated otherwise, use the remote control to operate the functions
described throughout this manual.
•
All functions can be accessed/operated with the remote control buttons,
some can also be accessed from the front panel of the unit. The function of the
remote control buttons is the same as the corresponding buttons on the front
panel of the DVD Player.
•
See the following pages for detailed information about these functions.
Instructions (Cont.)
Summary of Contents for KHS888W1
Page 35: ...35 ...
