Akai KHS888W1, Instruction Manual

Page: 13 / 36

13
Getting Started
Installing Batteries
1. Remove the battery cover.
2. Insert two AAA batteries (supplied) into the battery compartment, making sure
to match the polarity symbols (+/-). Only use fresh batteries of the same type
and size.
3. Close the battery cover.
NOTE:
• If the batteries leak, clean the battery compartment with a cloth and wash any
chemicals off your skin immediately as the chemicals can cause a rash.
• If the remote control is not going to be used for a long time, remove the batteries.
• Dispose of used batteries promptly, observing any local hazardous waste
regulations.
Starting Up
1. Before turning on, check whether all connections are correct and secure. Then
plug in the power connection.
2. Press the POWER button on the front panel or remote control to turn the unit
on.
3. To play a CD / DVD disc, press Open/Close button top the main unit to open
the disc tray. Put a disc into the disc tray and close the tray. The disc will start
playing automatically.
4. Press the POWER button on the remote control (or on the front panel) to switch
the unit to standby mode, or to turn it on at a later stage.
NOTES:
• If your TV image become discolored, move your Hi-Fi System further away from
your TV.
• Make sure to match the speaker cord to the appropriate terminal on the
components: + to +, - to -. If the cords are reversed, the sound might be
distorted and will affect base sound.
• Make sure children do not touch the speaker duck.