Akai Ewi4000s, Operator'S Manual

Page: 34 / 62

EWI4000s Operator’s Manual rev 1.0
26
Chapter3: Playing EWI4000s with Internal Sound
Adjusting the Reverb volume
This procedure adjusts the overall Reverb effect volume of the EWI4000s.
1. Press the [FX] button.
While pressing the [FX] button, the current Re-
verb effect volume is shown on the Program/
Data display.
2. While continuing to press the [FX] but-
ton, adjust the volume by pressing the
[HOLD] button or the [OCT] button.
The [HOLD] button works as ( + ), and the
[OCT] button works as ( - ).
Adjusting the Reverb effect volume of each program
This procedure adjusts the Reverb effect volume on each Program. It affects only the
Reverb effect volume of the selected Program, but does not affect the overall Reverb
effect volume. The Reverb effect volume of each program is stored in the EWI4000s.
1. Select the program you wish to adjust the Reverb effect volume.
2. While pressing the [FX] button, press the [SETUP]
button.
While pressing both the [FX] button and [SETUP] button,
“rb” is shown on the Program/Data display. When you
release both buttons, the current Reverb effect volume of the
selected program will be shown on the Program/Data display.
3. Adjust the Reverb effect volume by pressing the [HOLD] button or the
[OCT] button.
The [HOLD] button works as ( + ), and the [OCT] button works as ( - ).
4. Press the [SETUP] key.
The EWI4000s returns to the “PLAY” mode.