13
TROUBLE SHOOTING
INSTALLING / REPLACING BACKUP BATTERY
BATTERY LOW INDICATOR
When the backup battery power is low, the low battery indication icon will display and blink.
It is time to replace the backup battery.
TO INSTALL / REPLACE BACKUP BATTERY
1.
Make sure the AC adaptor is connected during battery replacement. Otherwise,
all settings may be lost and reset.
2.
Remove the screw that secures the battery door by using a screwdriver.
3.
Pull the battery door at the back of the unit as shown below.
4.
Insert a new battery in the battery door with “+” positive facing up. Only CR2450
3V lithium battery should be used.
5.
Insert the battery door with new battery back into the unit.
6.
Secure the battery door by using a screwdriver.
7.
After the battery replacement, the low battery indication icon will disappear.
BATTERY WARNING:
1.
Make sure the correct polarity of battery to be installed.
2.
Make sure you dispoe of batteries properly (refer to your local regulations)
3.
Do not open batteries
4.
Do not dispose of batteries in fire
5.
Do not heat up batteries
6.
Do not expose battereis to water
7.
Do not change or recharge batteries
N
O
I
T
U
L
O
S
E
S
U
A
C
E
L
B
I
S
S
O
P
M
E
L
B
O
R
P
The unit does not
turn on.
The power adaptor isn’t plugged into
a working wall socket or the power
jack on the back of unit is not
plugged
Plug the power adaptor into a
working wall socket and plug the
connector into the DC IN jack on
the unit
Battery low indicator
always flashing
Battery is weak
Replace with new batteries
FM band is too noisy
The reception at the set location is
poor or the antenna is not extended
Extend the antenna fully and relocate
your unit away from metal surfaces
Battery were not installed properly
Check to make sure the polarity is
correct
PU
SH
