9
USING THE ALARM (Cont’d)
TO SET THE ALARM
1.
Press and hold the
ALARM 1
button until the alarm hour flashes.
2.
Press the
+
or
-
button to set the alarm hour. (hold the button for fast advance).
Note: Remember to set the correct AM or PM time.
3.
Press the
ALARM 1
button to confirm the alarm hour and start to set alarm minute.
4.
Press the
+
or
-
button to set the alarm minute. (hold the button for fast advance).
5.
Press the
ALARM 1
button again to confirm and start to set alarm date mode
(date of week).
6.
Press the
+
or
-
button to set the alarm date mode as follows:
Mon Tue Wed Thu Fri Sat Sun
= Everyday mode
Mon Tue Wed Thu Fri
= Weekday mode
Sat Sun
= Weekend mode
7.
Press the
ALARM 1
button again to confirm and start to set the sound source (wake-
to radio or wake-to buzzer).
8.
Press the
+
or
-
button to set the sound source.
9.
Press the
ALARM 1
button (or no button pressed within 10 seconds) to set the
ALARM 1 to ON and exit the alarm set mode.
Note:
If the alarm is set as wake-to RADIO, the alarm goes off when the radio is
ON and playing. The unit would automatically switch to BUZZER mode and alarm
sound will become buzzer sound so you would not miss the alarm.
TO REVIEW THE ALARM
1.
After the alarm has been set, to review the alarm time, press the
ALARM 1
(or
ALARM 2
) button once. The set alarm time will show on the display.
2.
After 3 seconds, it will go back to normal time display.
TO TURN THE ALARM ON/OFF
1.
During the alarm time review, press the
ALARM 1
(or
ALARM 2
) button again to
toggle alarm ON/OFF. If the alarm has been activated (turned on), either BUZZER or
RADIO icon will display below the ALARM icon and vice versa.
2.
After 3 seconds, it will go back to normal time display.
TO STOP THE ALARM AND RESET THE ALARM READY FOR THE NEXT DAY
1.
When the alarm is sounding, press the
ALARM 1
(or
ALARM 2
or
POWER ON/OFF
)
button to stop the alarm.
2.
The unit would be automatically reset and ready for the next day. (For example, if
alarm us set for weekday mode and you stop the alarm on Friday, the alarm will come
again on next Monday, not Saturday.
SNOOZE FUNCTION
1.
Press the
SNOOZE/DIMMER
button after an alarm sounds. The alarm will be silenced
for the snooze duration preiod and then sound again.
2.
Snooze can be pressed several times around the 1 hour alarm cycle. The snooze
duration is 7 minutes. (
7->14->21->28->35->42->49->56
)
ALARM DURING POWER FAILURE
1.
If backup battery (not empty) is installed, the buzzer alarm will still sound for 60
seconds in the event of power failure. (Snooze function is disabled.)
2.
To stop the buzzer sound, you can press the
POWER ON/OFF
button.
