8
Remark:
•
If there is no disc in the unit, “No” or “Er” will be indicated on the display.
•
If the CD cannot be read, “No” or “Er” will be indicated on the display.
Remark:
• The unit can store up to 20 tracks in the programmable memories. During the programmed
playback, user can still select the “repeat 1/repeat all” functions.
• During playback, if you press
STOP
button once to stop the playback, the programmed tracks will
be stored. If you want to re-run the programmed tracks, press
PROG
button again and then press
PLAY/PAUSE
button.
Play/Pause Control
To pause playback temporarily by pressing the
PLAY/PAUSE
button. Music playback will be paused
and the current elapsed track number will be shown on the display and the play icon will be blinking.
Press the
PLAY/PAUSE
button again to resume playback.
Stop playback
To stop playback, press the
STOP
button on the unit. The total number of tracks of the disc will be
displayed.
Skip track
During playback, press the forward or backward
SKIP
buttons to skip to the next or previous tracks.
High-speed music search
During playback, press and hold the forward or backward
SKIP
buttons to skip/search through the
current track at high speed in forward or backward directions. When the
SKIP
buttons are released,
normal playback speed will be resumed immediately.
Repeat playback modes (Repeat 1/Repeat all)
Repeat the Current Track
During playback, press the
REPEAT
button until the icon is displayed to select the current track
to be repeated. The selected track will be repeated continuously.
Repeat All Tracks
During playback, press the
REPEAT
button until and ALL icons are displayed. All tracks on the
disc will be repeated continuously.
Return to normal playback
Press the
REPEAT
button until NO repeat indicator is displayed. The normal playback will be resumed.
Programmed CD playback
This unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD
compartment (without pressing the “PLAY/PAUSE” button)
1. Press
PROG
button once in the stop mode. “
PROG
” icon and the selected track “00”will be shown
on the display and blinking.
2. Press
the
SKIP
buttons to select the desired track to be programmed.
3. Press
PROG
button again to save the selected track.
4. Repeat steps 2-3 to program up to 20 tracks.
5. Press
the
PLAY/PAUSE
button to play the programmed tracks after programming is completed.
The “
PROG
” icon will be displayed during the programmed playback.
6. To clear program and resume normal playback, press the
STOP
button twice during playback, or
open the CD door, or change to RADIO mode to clear the programmed tracks.
1
