PARTS OF YOUR FAN
ASSEMBLING
1. Unscrew the spinner clockwise and the nut counter-clockwise then remove
both of them.
2. Use “Base Screw” to screw “Base & Fan Pillar” tightly, and then cover the “Base
Cover”.
3. Install” Rear Guard” in proper position with handle up and screw the screw.
4. Screw on plastic nut tightly to attach rear guard.
5. Set the “Rear Guard” into the “Round ring” in the proper position.
6. Install “Fan Blades” into “Blade Holder” in the proper position and then fix onto
motor shaft.
7. Cover “Blade Holder Cover”
8. Screw “Spinner” on to motor shaft counter-clockwise, to prevent the spinner
can be removed by hand, please screw the screw at the centre of “Spinner”,
then put the rubber protector to cover the screw carefully.
9. Fix “Front Guard” into “Round Ring” in the proper position.
4
ASSEMBLING
1. Unscrew the spinner clockwise and the nut counter-clockwise then remove both
of them
2. Use “Base Screw” to screw “Base & Fan Pillar” tightly, and then cover the “Base
Cover”
3. Install” Rear Guard” in proper position with handle up and screw the screw.
4. Screw on plastic nut tightly to attach rear guard
5. Set the “Rear Guard” into the “Round ring” in the proper position
6. Install “Fan Blades” into “Blade Holder” in the proper position and then fix onto
motor shaft
7. Cover “Blade Holder Cover”
8. Screw “Spinner” on to motor shaft counter-clockwise, to prevent the spinner can
be removed by hand, please screw the screw at the centre of “Spinner”, then put
the rubber protector to cover the screw carefully.
9. Fix “Front Guard” into “Round Ring” in the proper position
OPERATING
Place the appliance on a dry and flat surface. Operate the appliance with the noted
power voltage which was marked on the appliance (A.C. only). Do not immerse the
appliance into water; use a damp cloth to wipe the body and a dry one to wipe over
the water. Note: please let the appliance cool down fully before cleaning.
1. Plug the power supply cord into
a wall outlet.
2. To make/stop the fan head
oscillate, pushes down/pull the
clutch knob.
3. To adjust the airflow upward or
mild downward, simply adjust
the grille to desired angle by
hand freely, must shut down
the fan before the adjustment.
4.
Speed is controlled by Speed
switch.
