26
BLUETOOTH OPERATION
ABOUT PAIRING
Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. This
allows the devices to see each other and sets up a one to one communication channel between both
devices.
This unit can receive stereo audio signal from a
BLUETOOTH
stereo audio source device.
1.
Power on the unit, switch to
BLUETOOTH
mode by pressing MODE button repeatedly.
2.
LED indicator rapid blinking while it is pairing.
3.
Enable the Bluetooth of the Bluetooth audio source device.
4.
Pair and connect to
ASB-66
(the unit) on the audio source device. If prompted for pass code,
enter “
0000
”.
5.
Pairing successful (LED indicator blue), ready to stream music.
6.
During playback, press
PLAY/PAUSE
button to cease or resume the playback.
7.
During playback, press
TUNING/SKIP/SEARCH FORWARD
button to skip to the next track;
press
TUNING/SKIP/SEARCH BACKWARD
button twice to skip to the previous track.
8.
During playback, press and hold
TUNING/SKIP/SEARCH
buttons to search through the
current track forward or backward.
Note:
y
Pairing mode is exited about 1.5 minutes.
y
The above are generic steps to pair a BLUETOOTH device, for more specific instructions on
BLUETOOTH connectivity for your device, please consult your manufacturer’s manual.
y
AKAI
ASB-66
has an automatic Bluetooth connection function, Bluetooth pairing and connecting
are only required for the first time with your
smartphone/iPad/Laptop
or any other devices
with Bluetooth. After the 1st time connection, ASB-66 can detect your
smartphone/iPad/
Laptop
or any other devices which have previously been connected, Bluetooth connection will
then be done automatically without needs of repairing.
RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE
If the device is already paired with the
ASB-66
, but became unconnected even with both Bluetooth
devices turned on. You can re-connect them by following steps:
1.
Press and hold the PAIR button on the unit or on the remote to re-link the audio source device.
The Bluetooth indicator will blink for about 1.5 minutes for connecting.
2.
Select
ASB-66
on the audio source device for connecting. Bluetooth indicator will turn to solid
blue if the
ASB-66
and the device have been re-connected successfully
Summary of Contents for ASB-66
Page 1: ......
