Akai APC20, Service Manual

Page: 7 / 42

Part II
Functionality Test
Setting up
1
Plug in the power and USB cable to the APC20.
2
Connects the usb with the PC
3
Press the power switch to power on the set before start the test program.
4
Open the APC20 Test Application by double click or simply select using a mouse and press the
Enter button on the keyboard on the APC20 Test Program .10.exe as shown in the figure below.
Figure 2: APC20 Test Program ICON
5
After the program have been loaded, it will pop up a selection window which you need to select
USB device as shown below. Select USB Audio Device for WinXP and APC40 for Win Vista
Figure 3: Selecting USB device
6
After Selecting the USB device used, a main test window will show up as below.
Figure 4: Main test window
APC20 TEST PROCEDURES