Akai AK4919UHDS, Instruction Manual, Page: 28 / 64

28
Getting Started
Once you have connected your TV antenna and other AV playback equipment (ie. CD
player, amplifier, Blu-ray player) to the appropriate input sockets on the back of the TV,
you will need to be comfortable with selecting several basic operations before setting
up your TV using the Menu system.
Powering the TV
To turn the power ON or OFF:
•
Plug the power cord into a suitable power point and turn on power at the outlet.
• Press the POWER button, on the right lower side of the back panel (or on the
remote control, making sure to aim it at the sensor at the front of the TV); the
indicator will glow blue when the TV is switched on.
• Press the POWER button again to power off (set it in standby mode); the indicator
will glow red.
NOTE:
• Switching off and on again: After you have switched off the TV, do not immedi-
ately try to power it on again. If you want it back on, wait for at least 30 seconds,
until the indicator light has gone out, before switching on the TV again.
• Standby mode: If you are not going to use your TV for a long period of time,
switch it off and then unplug it from the power supply. Do not leave it in standby
mode for a long period of time.
First Time Use
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen, as illustrated below.
Step 1: Select the Language
• Use the / navigation buttons to select
your desired on-screen display language.
• Press the OK button to confirm your
selection and proceed to the next step.
Getting Started