7
7
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | [email protected]
Getting Started
Unpacking
• Packaging materials:
This product has been packaged to protect it against
transportation damage. Remove all packaging materials from around and inside the
appliance and keep the original packaging carton and materials in a safe place. It
will help prevent any damage if the product needs to be transported in the future,
and you can use it to store the appliance when it is not in use. In the event that the
carton is to be disposed of, please recycle all packaging materials where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Parts: Check to ensure you have all the parts listed in the Product Overview section.
• Damage: When unpacking, check the appliance carefully for damage. If it is
damaged, do not install the appliance. Contact our after sales support centre for
advice on examination or return of the damaged appliance.
• Power cord: Unwind the power cord to its full length and inspect it for damage.
Do not use the appliance if the appliance or its cord has been damaged or is not
working properly. In case of damage, contact our after sales support centre for
advice on examination, repair or return of the damaged product.
• Read the manual: Before installing your new freezer, read all safety instructions,
especially the sections on installation and electrical safety on pages 4–5. Installation
instructions follow on the next page.
• Clean:
Make sure the freezer is disconnected from the power supply before
cleaning the interior surfaces and all internal accessories with lukewarm water with a
little baking soda added (about 2 tablespoons of baking soda to 1 litre of water) and
a soft cloth. This will remove any dust from transit and storage and help remove the
typical smell of a brand new product. Then dry thoroughly.
IMPORTANT: Do not use harsh or abrasive detergents or powders as these will
damage the finish.
• Door opening: Your freezer has the capability of the door opening from the right or
left side. If your set-up requires reversal of the door swing and/or external handle,
please follow the instructions on pages 15-18.
• Your new freezer is now ready for installation.